In case of questions that are not answered on our website, Tuftex Technical Support can be contacted via email or by calling 800.777.7663, Monday-Friday, 8 a.m. to 5 p.m. Eastern Time. |
|
|
Can Tuftex be ordered in custom widths or lengths? |
Tuftex panels can be easily cut to fit a desired length.
PolyCarb, UltraVinyl, SeaCoaster & DeckDrain residential panels are 26 wide, available in 8 and 12 lengths. Selected styles and colors are also available in 10, 14 and 16.
Poly-Lite commercial panels are 38 wide, available in either 9" and 12" profiles. They come in 8', 10, 12 and 16 lengths.
Tuftex Ag Panels are available in 26 or 38 wide, and 82, 102, 122, 164 and 204 lengths. |
|
|
What is the proper crossbrace support for Tuftex? |
Install Tuftex Vinyl panels (SeaCoaster, UltraVinyl, Ag Panels) on a maximum of 24 on center. Tuftex PolyCarb can span 36 on center. |
|
|
Is Tuftex covered by a warranty? |
Tuftex PolyCarb is covered by a Limited Lifetime Warranty.
Tuftex Ag Panels are covered by a 10-Year Limited Warranty.
|
|
|
Can I use Tuftex under my deck? |
|
|
|
How many nails do I use per panel? |
8 panel = 30 nails or screws
10 panel = 35 nails or screws
12 panel = 40 nails or screws
14 panel = 45 nails or screws
16 panel = 50 nails or screws
NOTE: Pre-drill all fastening holes 2/16 to 3/16 larger than the diameter of the fastener to address expansion and contraction of the panel. |
|
|
What product is best for withstanding the extreme elements? |
Tuftex PolyCarb, Poly-Lite & Ridge-Lite panels are made of tough polycarbonate. They can withstand temperatures of 270Ί F to 40Ί F. |
|
|
Will Tuftex work in high-wind areas? |
For added resistance to wind, Tuftex can be fastened at every crown. |
|
|
The label says This Side Up. Does it matter which side of the panel faces up? |
The material is no different on either side. When a panel is installed with the labeled side up, the corrugation at the edge of the panel will end in a peak. |
|
|
